Q-Logic FC Network Card User Manual


 
3–Interactive Commands
HBA Information Menu (Command Line Option -i)
SN0054614-00 K 3-21
If you select a number corresponding to an FCoE engine rather than a port, the
following general information is shown:
-----------------------------------------------------------------
Host Name : TARGET3
HBA Model : QLE8042
HBA Description : QLE8042 Mercury CNA
Firmware Version : 1.1.0 (Operational)
-----------------------------------------------------------------
Where Firmware Version is the version of FCoE firmware installed on the
adapter, along with one of the following descriptions:
Operational indicates you are using an installed version of the
application.
Golden indicates you are running from the ROM version.
HBA Information
(Command Line Option -i)
2: HBA Information n: Port Number 1: HBA Information
This option produces the same HBA Information Menu available from the
General Information, Report menu. See “Generate Report (Per Adapter Port)”
on page 3-11.
To view FCoE information, enter the following command line option:
scli -fcoe ( <hba instance> | <hba wwpn> ) --info
For the QLx81xx adapters only, additional information includes the ENode MAC
Address, which is that adapter’s FC node MAC address.
HBA Alias
(Command Line Option -ha)
2: HBA Information n: Port Number 2: HBA Alias
When you select this option, SANsurfer FC/CNA HBA CLI shows the following
information about the adapter:
Adapter Model
WWNN
Serial number
Alias
With this option you can create, modify, or delete the symbolic name or alias, for
an adapter.