Filter
Top Products
3–Interactive Commands
HBA Parameters Menu
3-28 SN0054614-00 K
1. Connection Options (read-only on QLE8042, QLE/QMI81xx, and SMB adapters):
0 = Loop Only
1 = Point-to-point Only
2 = Loop preferred, otherwise Point-to-Point
3 = Point-to-Point, otherwise Loop (QLA22xx Only)
2. Data Rate (read only on QLE8042 and SMB adapters):
0 = 1 Gbs
1 = 2 Gbs
2 = Auto
3 = 4 Gbs
4 = 8 Gbs
3. Others:
0 = Disable
1 = Enable
4. Option is not available on 4Gb or latest adapters.
5. Option is available on 4Gb or latest adapters.
6. Operation Modes:
0 = Interrupt for every I/O completion
5 = Interrupt when Interrupt Delay Timer expires.
6 = Interrupt when Interrupt Delay Timer expires or no active I/O.
Connection Options
3: HBA Parameters 1: Port Number 2: Configure HBA Parameters n. Connection Options
From this menu, you can configure the connection options:
0—Loop Only
1—Point to Point Only
2—Loop Preferred, Otherwise Point-to-Point
3—Point-to-Point, Otherwise Loop (QLA22xx adapter only)
Type the number for the connection type you want, and then press
ENTER
.
ResetDelay RD 0–255
Table Notes
NOTE:
Connection options are read-only on QLE8042, QLE/QMI81xx, and SMB
adapters.
QLE/QMI81xx adapters support only the Point to Point Only option.
Table 3-1. Adapter Parameters Settings (NVRAM) (Continued)
Parameter Name Alias Value Description