Filter
Top Products
SN0054614-00 K 1-1
1 Installation and Removal
This chapter lists the supported QLogic adapters and system requirements,
provides procedures for downloading and installing SANsurfer FC/CNA HBA CLI,
and instructions for removing the product. Refer to the following sections:
“Supported QLogic Adapters” on page 1-2
“Supported Operating Systems” on page 1-3
“System Requirements” on page 1-4
“Downloading the Installation Package” on page 1-6
“Installing SANsurfer FC/CNA HBA CLI” on page 1-7
“Uninstalling SANsurfer FC/CNA HBA CLI” on page 1-21
Prerequisites
Before you run SANsurfer FC/CNA HBA CLI, ensure that the following
requirements are met:
The adapters must be installed.
The adapter drivers must be installed.
For QLE81xx and QMI81xx adapters, a QLogic-specific small form factor
pluggable (SFP) must be installed.
NOTE:
Some SANsurfer FC/CNA HBA CLI features are not available when:
You have a Solaris system that is running with the driver distributed with
the OS installation CDs (QLC driver).
You have a Linux system that is running with the IOCTL or sysfs (inbox)
driver.
You have a Linux system that is running with a VMware driver.