Filter
Top Products
A–XML Format 1
XML Format 1 Tags for Each Option
A-2 SN0054614-00 K
Status Message
Before the closing main tag </QLogic>, SANsurfer FC/CNA HBA CLI shows
returning status from the execution of the command line parameters and the error
messages. A return value of 0 indicates success; a return value of 1 indicates
failure:
Successful execution of the command line parameters returns the following
status:
<Status> 0 </Status>
When the execution of the command line parameters fails, the status value
of nonzero is shown, followed by an error message that provides additional
details:
<Status> 1 </Status>
<ErrorMsg> Details of the failure </ErrorMsg>
Reboot Message
When the execution of the command line parameters is successful and the
system must be restarted for the change to take effect, the following message is
shown:
<Reboot> 1 </Reboot>
When the execution of the command line parameters is successful and the
system does not need to be restarted, the following message is shown:
<Reboot> 0 </Reboot>
Error Message
Before the closing main tag </QLogic>, but following the Status message
SANsurfer FC/CNA HBA CLI shows error information if the status is nonzero
(indicating a failure).
<ErrorMsg> Details of the failure </ErrorMsg>
XML Format 1 Tags for Each Option
The following sections describe the XML format 1 for each command line option,
including:
“Display System Information (Command Line Option -g)” on page A-3
“Display Adapter Settings (Command Line Option -c)” on page A-4
“Display HBA Information (Command Line Option -i)” on page A-5