Filter
Top Products
3–Interactive Commands
FCoE Menu (Command Line Option -cna)
3-118 SN0054614-00 K
TLV
16: FCoE 4: TLV
When you select the TLV option from the FCoE Utilities Menu for
QLE81xx/QMI81xx adapters, a submenu menu prompts you to view either
Details or Raw type-length-value (TLV) data for DCBX. The TLV for link layer
discovery protocol (LLDP) frames is used to exchange parameters and their
values.
Details
16: FCoE 4: TLV 1: Details
If you select the Details option, TLV data appears such as in the following
example:
------------------------------------------------------
DCBX Parameters Details for CNA Instance 0 - QLE8142
------------------------------------------------------
Fri May 01 14:27:08 2009
DCBX TLV (Type-Length-Value) Data
=================================
DCBX Parameter Type and Length
DCBX Parameter Length: 13
DCBX Parameter Type: 2
DCBX Parameter Information
Parameter Type: Current
Pad Byte Present: Yes
DCBX Parameter Valid: Yes
Reserved: 0
DCBX Parameter Data
Priority Group ID of Priority 1: 0
Priority Group ID of Priority 0: 0
Priority Group ID of Priority 3: 1
Priority Group ID of Priority 2: 0
Priority Group ID of Priority 5: 0
Priority Group ID of Priority 4: 0
NOTE:
While the DCE statistics are running, you can change the viewing options by
pressing the keys listed above:
A
,
R
,
B
,
C
,
[
,
]
,
{
,
}
, and
ENTER
. The
C
key
(Clear Baseline) option is available only in Baseline mode.