Q-Logic FC Network Card User Manual


 
B–XML Format 2
XML Format 2 Tags for Each Option
SN0054614-00 K B-13
<HBA>
<HBA Instance="value" HBAModel="value" HBAPort="value"
WWNN="value" WWPN="value" />
<DriverSettings>
<Info PersistentPlusNew="value"
PersistentOnly="value"
BindbyWWPN="value"
BindbyPortID="value" />
</DriverSettings>
</HBA>
<Status> n </Status>
<?ErrorMsg> "message" </ErrorMsg?>
<Reboot> n /Reboot>
</QLogic>
Display All Information for One or All Adapters
(Command Line Option -z)
The XML Format 2 for all adapter information is more complicated than its
non-XML counterpart because the tags cannot be repeated. In non-XML mode,
SANsurfer FC/CNA HBA CLI sequentially calls all the options in Table B-1, and
each option is shown in its standard output format. If each option shows its own
XML2 output, the resulting display would have multiple duplicate tags.
Table B-1. Options Shown by -z
Non-
interactive
Option
Description See User Guide Section
-g Show system information “Display System Information (Command
Line Options -g, -z, and -tp)” on page 4-1
-i Show adapter information “-i (Display HBA General Information or
VPD Information for One or All HBAs)” on
page 4-20
-c Show adapter settings “-c (Show Parameter Settings)” on
page 4-8
-t Show device list “-t (Display Target Information)” on
page 4-45
-l Show LUN list “-l (Display LUN Info)” on page 4-32
-p Target persistent binding “-p (Display Persistent Target Binding
Info)” on page 4-38
-m Selective LUNs “-m (View, Enable, or Disable LUNs)” on
page 4-33