Q-Logic FC Network Card User Manual


 
2–Getting Started
Starting Interactive Mode
SN0054614-00 K 2-3
Depending on which menu you select, may prompt you for more input. For
example, if you select HBA Parameters, SANsurfer FC/CNA HBA CLI prompts
you for the port number that corresponds to the adapter model you want to view.
NOTE:
Selections on the Main Menu are dynamic, and what you see depends on
your system’s operating system, drivers, and adapter type. Based on your
specific system, this menu may contain different items. For example:
Selection 5: may be either Target Link Speed or iiDMA Settings.
The Virtual menu selection is available only on Windows systems
running with a driver that supports NPIV (N_Port ID virtualization).
The QoS menu selection is available only on Windows systems with an
8Gb adapter.
The FCoE menu selection is available only if an FCoE or converged
network adapter is present.
For a converged network adapter with an inbox driver, the Main Menu
contains only these options:
Main Menu
1: General Information
2: HBA Information
3: HBA Parameters
4: Target/LUN List
5: Boot Device
6: Utilities
7: Beacon
8: Diagnostics
9: FCoE
10: Help
11: Exit
NOTE:
The Driver Update option under Utilities (option 10) is only available on
Windows.
In Solaris SPARC, the option to Save/Update BIOS is Save/Update
FCode.