Filter
Top Products
4–Non-Interactive Commands
Command Summary
4-8 SN0054614-00 K
To update one or all adapter’s Flash with new BIOS or FCode, type:
# scli -b (all | <hba instance> | <hba wwpn>) [(<-rg> | all)]
<BIOS/FCode File Name>
Where:
To save the BIOS/FCode to a file, type:
# scli -b (<hba instance> | <hba wwpn>) SAVE <BIOS/FCode File Name>
Where:
-c
(Show Parameter Settings)
Use the -c command to show the parameter settings for all adapters in the
system:
# scli -c [ <all> ]
To show the parameter settings for a specific adapter, type:
# scli -c (<hba instance> | <hba wwpn>)
Where:
-cna
(FCoE Utilities Menu for QLx81xx Adapters)
Use the -cna command to work with converged network adapters (QLE81xx
and QMI81xx).
all = All adapters of the same type in the system are updated with
the new BIOS/FCode
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name
-rg =
Flash region update mode (4GB adapters only
a
)
a
Region update only supported on QLA/QLE/QMC246x adapters.
all Update all regions (BIOS/FCode/EFI) depending on the Flash
BIOS/FCode File
Name
= Name or path of file continuing update BIOS/FCode
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
BIOS/FCode File
Name
= File name or a path to a file in which to save BIOS/FCode
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter