Q-Logic FC Network Card User Manual


 
3–Interactive Commands
Driver Settings Menu (Command Line Option -fg)
3-62 SN0054614-00 K
LUN List Menu
8: Boot Device n: Port Number 2: Configure Boot Device 2: Boot Device Settings 1: LUN List Menu
When you select this option, SANsurfer FC/CNA HBA CLI shows the LUN List
Menu, which includes a list of LUNs on the selected device. You can select any of
the lUNs as the boot device:
LUN: 0
LUN: 1
And so on.
Save Configuration
8: Boot Device n: Port Number 2: Configure Boot Device 2: Device Settings 1: LUN List 1: Save
Configuration
When you select this option, the CLI shows the Save Configuration menu:
Proceed
Cancel
Boot Device(s) (All HBAs)
8: Boot Device 1: All HBAs
When you select this option, SANsurfer FC/CNA HBA CLI shows information
about all boot devices for all adapters. For details, see “Boot Device(s) (Per
Adapter Port)” on page 3-60.
Product vendor
Product ID
Product revision
Driver Settings Menu
(Command Line Option -fg)
9: Driver Settings
When you select this option, SANsurfer FC/CNA HBA CLI shows the Driver
Settings Menu that lists the ports on each adapter. Select the number
corresponding to the port that you want, and then press
ENTER
to view the
Target: Display Options and Target: Binding Options.