Q-Logic FC Network Card User Manual


 
B–XML Format 2
XML Format 2 Tags for Each Option
B-12 SN0054614-00 K
<Status> n </Status>
<Reboot> n /Reboot>
</QLogic>
Diagnostics Results—Read/Write Buffer Test
(Command Line Option -kr)
The command format is:
scli -kr (<hba instance> | <hba wwpn>) [(-EX | -EXCLUDE)
<target wwpn>] (<param name> | <param alias>) <param value>
-x2
The XML Format 2 for the read/write buffer test results is as follows:
<?xml version="value" encoding="value"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.n.nn Build nn</AppVersion
<AppXmlVersion>n.nn</AppXmlVersion>
<HBA>
<HBA Instance="value" HBAModel="value" HBAPort="value"
WWNN="value" WWPN="value" />
<Target>
<WWNN> Target WWNN </WWNN>
<WWPN> Target WWPN </WWPN>
<Loop ID ="value" DataMiscompare="value" LinkFailure=
"value" LossOfSync="value" LossOfSignal="value" InvalidCRC="value"
Result="value" />
</Target>
</HBA>
<Status> n </Status>
<Reboot> n /Reboot>
</QLogic>
The <Target>... </Target> sequence repeats for each target.
View Driver Settings
(Command Line Option -fg)
The command format is:
scli -fg (<hba instance> | <hba wwpn>) (VIEW | ?) -x2
The XML Format 2 for the current driver settings information is as follows:
<?xml version="value" encoding="value"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.n.nn Build nn</AppVersion
<AppXmlVersion>n.nn</AppXmlVersion>