Filter
Top Products
3–Interactive Commands
Utilities Menu
3-72 SN0054614-00 K
Current Version: v1.0
Enter a file name or Hit <RETURN> to abort: c:\QLE8142_MPI.dat
Saving current MPI config table of HBA instance 0 to
c:\QLE8142_MPI.dat...
Mpi Configuration v1.0 of HBA instance 0 saved successfully.
Driver Rescan
(Command Line Option -rs)
10: Utilities n: Driver Rescan
The Driver Rescan option is available only on Solaris systems with the QLA
driver. When you select Driver Rescan from the Utilities menu, SANsurfer
FC/CNA HBA CLI prompts you to select an adapter port to rescan.
Firmware Area Update
(Command Line Option -u)
10: Utilities n: Firmware Area Update
The Firmware Area Update operation takes a firmware preload table .dat file
and writes the data to the Flash on the card.
This option is visible only if you have selected an 8Gb adapter.
To update the firmware area:
1. On the Utilities menu, select the number for the Firmware Area Update
option.
The following menu is shown, for example:
Firmware Area Update Menu
HBA Model QLE2562
1: Port 1: WWPN: 21-00-00-1B-32-16-18-EE Loop Down
2: Port 2: WWPN: 21-01-00-1B-32-36-18-EE Online
HBA Model QLE8000
Port 1: WWPN: 21-00-00-1B-32-0A-A9-B4 Link Down
FCoE Engine
Port 2: WWPN: 21-01-00-1B-32-2A-A9-B4 Link Down
HBA Model QLE220
Port 1: WWPN: 21-00-00-E0-8B-91-A4-26 Loop Down
HBA Model QLE2462
Port 1: WWPN: 21-00-00-1B-32-00-27-CE Online
Port 2: WWPN: 21-01-00-1B-32-20-27-CE Loop Down
3: All HBAs
4: Return to Previous Menu