Q-Logic FC Network Card User Manual


 
A–XML Format 1
XML Format 1 Tags for Each Option
SN0054614-00 K A-17
<MeasuredTxPowerUnit>(mW)</MeasuredTxPowerUnit>
<Value>"value"</Value>
<Status>"value"</Status>
<HighAlarm>"value"</HighAlarm>
<HighWarning>"value"</HighWarning>
<LowWarning>"value"</LowWarning>
<LowAlarm>"value"</LowAlarm>
</TxPower>
<RxPower>
<MeasuredRxPowerUnit>(mW)</MeasuredRxPowerUnit>
<Value>"value"</Value>
<Status>"value"</Status>
<HighAlarm>"value"</HighAlarm>
<HighWarning>"value"</HighWarning>
<LowWarning>"value"</LowWarning>
<LowAlarm>"value"</LowAlarm>
</RxPower>
</Diagnostics>
</HBA>
<Status> 0 </Status>
<Reboot> 0 </Reboot>
</QLogic>
The XML Format 1 for adapter transceiver details (detailed information) is as
follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.nn.nn Build nn</AppVersion>
<HBA>
<HBA Port="value" WWNN="value" WWPN="value" />
<OpticalTransceiverDigitalDiagnosticData></OpticalTransceiverDigit
alDiagnosticData>
<Address_A0>
<Identifier>"value" </Identifier>
<Ext.Identifier>"value"</Ext.Identifier>
<Connector>"value"</Connector>
<TransceiverData>
<Compliance> "value" </Compliance>
<FCLinkLength>"value" </FCLinkLength>
<FCTransmitterTech>"value"</FCTransmitterTech>
<FCTransmissionMedia>"value"</FCTransmissionMedia>
<FCSpeed>"value"</FCSpeed>
</TransceiverData>
<Encoding>"value"</Encoding>
<BR-Nominal> "value" </BR-Nominal>
<Length-9um-km> "value" </Length-9um-km>
<Length-9um> "value" </Length-9um>