Filter
Top Products
Type 2 Printer: Loading Paper and Other Media
93
9
sides of the flaps on the right as
shown in the illustration.
Important
❒
Make sure that the envelope
flaps are securely folded down,
and that there is no air inside
the envelopes.
Note
❒
Make sure that the top of the
stack is not higher than the limit
mark on the side fence.
❒
Do not press down on the stack
of envelopes with too much
force.
D
Slide the left side guide against
the edge of the envelope stack.
Note
❒
Make sure that the edges of en-
velopes fit under the side
guides.
E
Specify the envelope size and
feed direction using the operation
panel as follows.
A
Press
{
Menu
}
The following message appears.
Main Menu: j
Job Control l
B
Press
{
Enter
}
.
The following message appears.
Job Control: j
1.Paper Input l
C
Press
{
Enter
}
.
D
Press
{U}{T}
until the follow-
ing message appears.
Paper Input: j
3.Paper Size l
E
Press
{
Enter
}
.
The following message appears.
Paper Size: j
1.Bypass Tray l
F
Press
{
Enter
}
.
G
Using
{U}{T}
, select the enve-
lope type you want to use.
Reference
For informations on types of
envelopes you can select, see
P.65
“Paper and Other Media
Supported by Your Printer”
.
H
Press
{
Enter
}
.
I
After the panel display chang-
es, press
{
On Line
}
.
The panel display returns to the
ready condition as follows:
TS4Y311E
TS4Y331E