Filter
Top Products
Type 2 Printer: Installing Options
21
2
then pull it out of the printer.
Place it on a flat surface.
Note
❒
Do not touch the three white
pins on the right front side of
the paper feed unit.
F
Remove the white protective
sheet from inside of the paper
tray.
G
Remove the red protective sheet
taped on the guide.
H
While lifting the front side of the
paper tray, place it into the print-
er. Then slide it into the printer
until it stops.
Type 2 Printer: Installing the
Envelope Feeder Type 1400
Note
❒
Please refer to the inside of the
front cover of this manual to con-
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
Important
❒
This unit is a tray that slides into
the optional paper feed unit. With-
out the optional paper feed unit,
this envelope feeder cannot be
used.
❒
Do not slide more than one paper
tray out at a time. Having more
than one paper tray filled with pa-
per in a fully extended position
could cause the machine to tilt to-
ward.
A
Check the content of the box for
the following items.
• Envelope feeder
• Installation Guide
B
Pull out the paper tray of the op-
tional paper feed unit until it
stops. After that, lift it sightly,
then pull it out.
TS4Y091E
TS4Y111E
TS4Y301E
TS4Y150E