Filter
Top Products
Chapter 8 - 2
Green LED
blinks slowly.
Awaiting print
jobs sometime
after power-on
complete.
Some printer
interface error.
Error
Green LED
blinks rapidly
Awaiting print
jobs.
Has lost its
NetWare
connection to
file server.
Error. Check the
cable connection
and restart the
printer.
8.2 Status Report
The Status/Configuration report is sent as a print job to the printer when the print server is
powered on. For example, the report on the next page shows the configuration of the print
server immediately after the report is printed. Some printers also allow you to use a
command from the front panel that will produce a status report.
It is strongly recommended that you review this report immediately after installation and any
time the setup has been changed. If the report does not include a protocol that was
configured, check that the procedure was done properly.