Filter
Top Products
Setting Up the IP Parameters
27
3
register the IP address you speci-
fied.
The following message appears on
the panel display.
Network Setup: j
1.IP Address l
K
Press
{T}{U}
until the following
message appears.
Network Setup: j
2.Subnet Mask l
L
Press
{
Enter
}
.
The current subnet mask appears
on the panel display.
Subnet Mask:jld#
255.000.000.000
M
Specify the subnet mask using
the same procedure for specifying
the IP address.
N
Check if the pointer (
k
) is at the
rightmost digit, press
{
Enter
}
to
register the subnet mask you
specified.
The following message appears on
the panel display.
Network Setup: j
2.Subnet Mask l
O
Press
{T}{U}
until the following
message appears.
Network Setup: j
3.Gateway l
P
Press
{
Enter
}
.
The current gateway address ap-
pears on the panel display.
Gateway jld#
000.000.000.000
Q
Specify the gateway address us-
ing the same procedure for speci-
fying the IP address.
R
Check if the pointer (
k
) is at the
rightmost digit, press
{
Enter
}
to
register the gateway address you
specified.
The following message appears on
the panel display.
Network Setup: j
3 .Gateway l
S
Press
{
On Line
}
.
The panel display returns to the
ready condition as follows:
Ready
T
Turn the printer's power switch
off and on.