Filter
Top Products
Paper and Other Media
70
9
❖
❖❖
❖
Paper weight and number of sheets to be set
*1
Make sure that the top of the stack is not higher than the limit mark indicated on the
side fence of the tray.
*2
The envelope feeder requires the installation of the optional paper feed unit.
Type 2 Printer
Note
❒
Please refer to the inside of the front cover of this manual to confirm which
printer (Type 1 Printer or Type 2 Printer) you have.
Important
❒
Be sure to set the paper size dial to match the actual paper size loaded in the
tray.
❒
For Tray 1 and 2, the dial setting overrides the setting made with the opera-
tion panel.
❒
The envelope feeder requires the installation of the optional paper unit.
❒
The envelope feeder can be exchanged only with the Tray 2.
Note
❒
The supported paper size varies somewhat depending on the memory size of
your printer.
⇒
P.141
“Memory Capacity and Paper Size”
❒
Regarding the meanings of the abbreviations, see the notes at the bottom of
each table.
Supported paper
weight
Maximum number of
sheets (plain paper)
*1
Standard Tray
60 - 90 g/m
2
(16 - 24 lb) 250 (80 g/m
2
, 20 lb)
Paper Feed Unit (DLT) Type 2000
(option)
Paper Feed Unit (A3) Type 2000
(option)
60 - 90 g/m
2
(16 - 24 lb) 500 (80 g/m
2
, 20 lb)
Paper Feed Unit (LT) Type 2000
(option)
Paper Feed Unit (A4) Type 2000
(option)
60 - 90 g/m
2
(16 - 24 lb) 500 (80 g/m
2
, 20 lb)
Bypass Tray
60 - 162 g/m
2
(16 - 42 lb) 100 (80 g/m
2
, 20 lb)
For other kind of papers,
⇒ P.74
“Paper types and
cautions”
.
Envelope Feeder Type 2000
*2
⇒ P.74
“Paper types and cautions”