Filter
Top Products
Chapter 4 - 20
users and groups in the currently selected context and all
subcontexts.
When you double click on an entry in the list, the entry is added to
the printer’s service list.
The user/group list is updated whenever the Connection or NDS
Context fields are changed.
Delay in minutes for first message: Indicates how long the
Network Interface Board should wait before sending a notification
message that an error condition has been detected. The field is set
to 5 minutes by default. Its minimum value is 1 minute and
maximum value is 60 minutes.
Delay in minutes for repeat messages: Indicates how long the
Network Interface Board should wait before sending a repeat
notification of an error condition. This field is set to 30 minutes by
default. Its minimum value is 1 minute and maximum value is 60
minutes.
4.6.3.4 Configuring the Notify Settings
The Notify Settings screen appears when you double-click on an entry in the Users/ Groups
Notified by Printer field on the Print Server screen. Use this screen to set up the notify
function for the users or groups.
The following screen appears for setting up Notify. A description of each field follows the
screen example.
Below is a description of each field:
Field Description
User/Group name
Indicates the name of the user or group which is being
edited. This field cannot be changed.
Delay in minutes for
first message
Indicates how long the Network Interface Board should
wait before sending a notification message to the user
that an error condition has occurred.
The field is set to 5 minutes by default but can be set to
any value between 1 to 60 minutes.