Filter
Top Products
Removing Misfed Paper
113
10
the front cover easily, check if
the pressure release levers are
returned to their original posi-
tions. If not, return them to their
original positions, and try clos-
ing the front cover again.
If you uninstall the fusing unit
accidentally
Usually, it is not necessary to remove
the fusing unit. Follow these steps to
reinstall the fusing unit.
R
CAUTION:
A
Turn the printer's power switch
off.
B
Align the fusing unit with the
mark of the printer (
A
), and then
slide it in(
B
) as shown in the il-
lustration.
C
Return the brown fusing unit
lock levers to their original posi-
tions.
D
Close the front cover.
E
Turn the printer's power switch
on.
•
The fusing unit could be very hot.
When installing the fusing unit,
turn off the printer and wait about
30 minutes. After waiting, install
the fusing unit. Not waiting for the
unit to cool can result in a burn.
1
2
2
1
TS3M010E
TS3M020E
TS3H070E