Filter
Top Products
Error & Status Messages on the Operation Panel
101
10
Messages Description Comments
Load Tray XX
{paper size}
The tray XX is empty. Load {paper size} paper in the
specified feed direction into tray
XX. Printing will not automati-
cally resume if the paper size and
direction setting is incorrect.
There are 2 methods to resume
printing.
A
Use the operation panel to set
the correct size and direction
of the paper in the tray XX. ⇒
P.130
“Paper Input 2/2”
B
Press
{
Enter
}
to have printing
begin, regardless of the size
and direction of the paper in
the tray XX. .
Note
❒
When “Auto Select” is speci-
fied for the paper source us-
ing the printer driver, this
message might appear when
there is {paper size} paper in a
different direction in any of
the trays.
❒
The page is printed in the in-
correct format on the paper
loaded in the tray XX in the
following cases.
•if you press
{
Enter
}
with-
out loading the correct pa-
per.
• if the specified period of
time has passed with Auto
Continue feature on. In
these cases, you can't con-
tinue printing due to the
paper size error. You
should take one of the fol-
lowing actions to clear this
error:
• Press
{
Enter
}
. (Auto
Continue feature
doesn't work with this
error.)
• Open and close any of
the trays.
The actual size of paper
loaded in the tray XX does
not match the size for which
the page was built.