Filter
Top Products
Chapter 4 - 16
maximum field length is 128 characters.
NOTE: Make sure you enter the whole context, whether typed or
typeless.
Preferred NDS Tree
Enter a text string to set the NDS tree which the
Network Interface Board will use to login.
The maximum field length is 48 characters.
Enable Bindery Mode
Determines whether the Network Interface Board should attempt to
service the NetWare newtork in bindery mode. If this box is
checked, then Bindery Mode is enabled.
NOTE: If this field is not enabled, then the Primary File Server field
will not be enabled.
Primary File Server
Specifies which NetWare file server that the Network Interface
Board should use as the primary file server.
If no primary file server has been selected yet, or if a server that is
not available is selected, then the first file server in the list is
selected.
4.6.3.3 Print Server Settings
NWSetup lets you set up each Print Server printer. This information is usually entered using
NetWare’s NWADMIN or PCONSOLE utility. NWSetup eliminates the need for configuring
your Network Interface Board printer through any NetWare utility.
The screen on the next page is used to set up a Print Server printer. A description of each
field follows the screen example.
Field Description
Enable Printer
Indicate whether support for the Network Interface Board and
printer is enabled.
If this box is checked, then the printer is enabled.