Ricoh AP1400/AP2000 Printer User Manual


 
Please read the Safety Information in the “Operating Instructions” before using this
machine. It contains important information related to USER SAFETY and PREVENTING
EQUIPMENT PROBLEMS.
QUICK INSTALLATION GUIDE
Note
If the toner cartridge is not shaken enough, toner
might not be evenly distributed in the cartridge. In
this case, the print quality might be reduced.
Place the toner cartridge on a flat surface. Pull
out the tape inside the unit horizontally while
holding the cartridge with one hand as shown in
the illustration.
TS4K080E
Important
Be sure to pull the tape completely before installing
the toner cartridge. Otherwise, the printer might
be damaged.
Be sure to pull the tape horizontally. Pulling it
upward or downward causes toner scattering.
Be careful not to make your cloths dirty with toner.
After pulling out the tape from the cartridge, toner
scatters easily. Do not shake or give a shock to the
cartridge.
Holding the grips of the cartridge, insert it into
the printer until it stops as shown in the illustration.
TS4K090E
Close the front cover.
TS4K100E
Important
Do not close the front cover with force. If you cannot
close the cover easily, pull out the toner cartridge
from the printer and insert it again. After that, close
the front cover again.
WHERE TO PUT YOUR PRINTER
Your printer’s location should be carefully chosen
because environmental conditions greatly affect its
performance.
Warning
Make sure that the wall outlet is near the
machine and freely accessible, so that in event
of an emergency, it can be unplugged easily.
Warning
Only connect the machine to the power
source described on this sheet.
Avoid multi-wiring.
Do not damage, break or make any
modifications to the power cord. Do not place
heavy objects on it, pull it hard or bend it more
than necessary. These actions could cause an
electric shock or fire.
Caution
Keep the machine away from humidity and dust.
A fire or an electric shock might occur.
Place the machine on a strong and level surface.
Otherwise, the machine might fall and cause
personal injury.
Caution
If you use the machine in a confined space,
make sure there is a continuous flow of air.
Optimum Environmental Conditions
The recommended temperature and humidity
32
°
C
54%
27
°
C 80%10
°
C 80%
32
°
C 15%
10
°
C 15%
%RH
80
60
40
20
10 20 30
°
C
15
°
C
70%
15
°
C
30%
25
°
C
30%
25
°
C
70%
TS4K030E
Possible operation range Recommended range
The machine must be level within 5 mm, 0.2" both front to right
and left to right.
Environments to Avoid
Important
Locations exposed to direct sunlight or strong light
Dusty areas
Areas with corrosive gases
Areas excessively cold, heat, or humid
Locations near an air conditioner or humidifier
Locations near other electronic equipment
Locations where the printer might be subjected to
frequent strong vibration
Power Connection
Connect the power cord to a power source with a following
specifications:
120V, 60Hz, 6 A or more
INSTALLING THE TONER
CARTRIDGE
Warning
Do not incinerate spilled toner or used toner.
Toner dust might ignite when exposed to an open
flame.
Disposal can take place at our authorized dealer
or at an appropriate collection site.
If you dispose of the user toner containers yourself,
dispose of them according to your local regulations.
Caution
Do not eat or swallow toner.
Keep toner (used or unused) and toner cartridge
out of reach of children.
Caution
Our products are engineered to meet the highest
standards of quality and functionality. When
purchasing expendable supplies, we
recommend using only those provided by an
authorized dealer.
Important
Do not expose the toner cartridge to a light for a
long time. If you do, the toner cartridge will be
damaged and the print quality might be reduced.
Open the front cover by pulling the front cover
release buttons.
TS4K050E
Pull the toner cartridge out of the printer by
holding the grips of the cartridge.
TS4K060E
Note
Do not hold the toner cartridge upside down or
stand it vertically.
Hold the toner cartridge as shown in the
illustration, and shake it side to side, about 7 - 8
times.
TS4K070E
CONNECTING THE POWER CORD
Caution
When you pull the plug out of the socket, grip
the plug to avoid damaging the cord and causing
a fire or an electric shock.
Caution
It is dangerous to handle the plug with wet hands.
Doing this may result in receiving an electrical
shock.
Check that the power switch is turned off. If it is
on, turn it off.
o
f
f
o
n
TS4K110E
Off
Insert the plug of the power cord into the wall
socket securely.
Turn the power switch on.
TS4K130E
o
f
f
o
n
On
UNPACKING THE PRINTER AND
CHECKING THE CONTENTS OF
THE BOX
Check the contents of the box according to the
following list. If one or some items are missing,
please contact your sales or service
representative.
Important
The interface cable is not included in the box. It is
your responsibility to provide the interface cable
appropriate for the computer that you are using.
Quick Installation Guide (this sheet)
Operating Instructions
CD-ROM
Output Tray Extender
Additional Documentation
Remove the plastic bag. Lift the printer and move
it to the place where you want to install it.
When lifting the printer, use the inset grips on both sides of the printer.
TS4K010E
Remove the four pieces of adhesive tape from
the printer as shown in the illustration.
TS4K020E
2
1
3
4
Install the output tray extender to the output tray.
ILLUSTRATION
<G032-8617>
Space Required for Installing the Printer
Leave enough space around the printer. This space is necessary to
operate the printer. The recommended (or minimum) space
requirement is as follows:
TS4K040E
B
D
C
A
A: more than 10 cm (4.0")
B: more than 10 cm (4.0")
C: more than 100 cm (40.0")
D: more than 10 cm (4.0")