Filter
Top Products
8-24 Phaser 8400/8500/8550/8560 Color Printer Service Manual
Service Parts Disassembly
12. Remove two screws securing each end of the Transfix Load Module to the
chassis.
13. Remove the Transfix Load Module by rotating the bottom in and pulling it
forward.
N
o
t
e
The Transfix Load Module is a very tight fit, remove carefully.
R
ep
l
acemen
t
N
o
t
e
Place a small amount of Rheolube 768 grease (P/N 070E00890) in
the groove on the end of each Transfix Load Arm before reattaching
the spring hooks.
After installing the Exit Module, perform the Wiper Alignment
procedure on page 6-2. The printer may report error 7,009.4x if the
Wiper Assembly is misaligned.
s8500-090
Transfix Load Module
s8500-092
Transfix Load Module