ARM R4 Computer Hardware User Manual


 
Programmer’s Model
ARM DDI 0363E Copyright © 2009 ARM Limited. All rights reserved. 2-16
ID013010 Non-Confidential, Unrestricted Access
2.8 Exceptions
Exceptions are taken whenever the normal flow of a program must temporarily halt, for
example, to service an interrupt from a peripheral. Before attempting to handle an exception, the
processor preserves the critical parts of the current processor state so that the original program
can resume when the handler routine has finished.
This section provides information of the processor exception handling:
Exception entry and exit summary
Reset on page 2-18
Interrupts on page 2-18
Aborts on page 2-22
Supervisor call instruction on page 2-24
Undefined instruction on page 2-25
Breakpoint instruction on page 2-25
Exception vectors on page 2-26.
Note
When the processor is in debug halt state, and an exception occurs, it is handled differently to
normal. See Exceptions in debug state on page 11-47 for more details
2.8.1 Exception entry and exit summary
Table 2-4 summarizes the PC value preserved in the relevant R14 on exception entry, and the
recommended instruction for exiting the exception handler.
Table 2-4 Exception entry and exit
Exception
or entry
Recommended return instruction
Previous state
Notes
ARM R14_x Thumb R14_x
SVC
a
MOVS PC, R14_svc
IA + 4 IA + 2 Where the IA is the
address of the SVC or
Undefined instruction.
UNDEF
Varies
b
IA + 4 IA + 2
PABT
SUBS PC, R14_abt, #4
IA + 4 IA + 4 Where the IA is the
address of instruction that
had the Prefetch Abort.
FIQ
SUBS PC, R14_fiq, #4
IA + 4 IA + 4 Where the IA is the
address of the instruction
that was not executed
because the FIQ or IRQ
took priority.
IRQ
SUBS PC, R14_irq, #4
IA + 4 IA + 4
DABT
SUBS PC, R14_abt, #8
IA + 8 IA + 8 Where the IA is the
address of the Load or
Store instruction that
generated the Data Abort.
RESET
NA
- - The value saved in
R14_svc on reset is
Unpredictable.
BKPT
SUBS PC, R14_abt, #4
IA + 4 IA + 4 Software breakpoint.
a. Formerly SWI.