Figure 63: Connecting a Fiber-Optic Cable to an Optical Transceiver
Installed in an EX Series Switch
g027016
Fiber-optic cable
Transceiver
4. Secure the cables so that they are not supporting their own weight. Place excess
cable out of the way in a neatlycoiled loop.Placing fasteners on a loop helps cables
maintain their shape.
CAUTION: Do not bend fiber-optic cables beyond their minimum bend radius. An arc
smallerthana fewinches indiametercan damage the cablesand causeproblemsthat
are difficult to diagnose.
Donot letfiber-optic cables hangfree fromthe connector.Do not allow fastened loops
of cables to dangle, which stresses the cables at the fastening point.
Related Topics • Disconnecting a Fiber-Optic Cable from an EX Series Switch on page 221
• Installing a Transceiver in an EX Series Switch on page 163
• Maintaining Fiber-Optic Cables in EX Series Switches on page 231
• Optical Interface Support in EX2200 Switches
• Optical Interface Support in EX3200 and EX4200 Switches
• Optical Interface Support in EX4500 Switches
• Optical Interface Support in EX8200 Switches on page 60
Copyright ©2010,Juniper Networks,Inc.166
CompleteHardwareGuide forEX8208 EthernetSwitches