Juniper Networks EX8208 Switch User Manual


 
NOTE: EX8208 switches support 2000 W DC power supplies.
EX8216 switches support 3000 W DC power supplies.
Figure 29: DC Power Supply LEDs in an EX8200 Switch
Table 28 on page 51 describes the LEDs on a DC power supply in EX8200 switches.
Table 28: DC Power Supply LEDs in EX8200 Switches
DescriptionStateLED
Indicatesone of the following:
Powersupplyis disconnected from DC power feed.
DC power input voltageis not within normal
operating range (-40 VDC through-72 VDC).
No DC power input.
UnlitA IN OK
DC power input voltageis within normal operating
range (–40 VDC through–72 VDC).
Green
DC input is presenton the terminalsbut either the
fuse is trippedor the ORing diode is open.
Yellow
DC power input voltageis reversedin polarity.
NOTE: The DC powersupplyis protectedagainst
reversepolarityinput for both DC input feeds.
Red
51Copyright©2010, JuniperNetworks, Inc.
Chapter2:ComponentDescriptions