Filter
Top Products
unplugging is then absorbed by the short fiber extension, which is easier and less
expensive to replace than the instruments.
•
Keep fiber-optic cable connections clean. Micro-deposits of oil and dust in the canal
of the transceiver or cable connector cancause loss of light, reduction in signal power,
and possibly intermittent problems with the optical connection.
Tocleanthetransceivercanal,useanappropriatefiber-cleaningdevicesuchasRIFOCS
Fiber Optic Adaptor Cleaning Wands (part number 946). Follow the directions in the
cleaning kit you use.
Aftercleaningthetransceiver,makesurethattheconnectortip ofthe fiber-opticcable
is clean. Use only an approved alcohol-free fiber-optic cable cleaning kit such as the
Opptex Cletop-S
®
Fiber Cleaner. Follow the directions in the cleaning kit you use.
Related Topics Handling and Storing Line Cards in EX8200 Switches on page 227•
• Maintaining Line Card Cables in EX8200 Switches on page 231
• Connecting a Fiber-Optic Cable to an EX Series Switch on page 165
• Laser and LED Safety Guidelines and Warnings for EX Series Switches on page 269
• Optical Interface Support in EX2200 Switches
• Optical Interface Support in EX3200 and EX4200 Switches
• Optical Interface Support in EX4500 Switches
• Optical Interface Support in EX8200 Switches on page 60
Copyright ©2010,Juniper Networks,Inc.232
CompleteHardwareGuide forEX8208 EthernetSwitches