Filter
Top Products
Figure 69: Connecting the Power Supply Cables to an EX8200 Switch
8. Install the plastic cable cover over each set of power cables, using the number 2
Phillips (+) screwdriver to tighten the screw (see Figure 70 on page 179).
Figure 70: Installing the Plastic Cable Cover on a DC Power Supply in an
EX8200 Switch
9. Ensure that the power supply is fully inserted and latched securely in the chassis.
See “Installing a DC Power Supply in an EX8200 Switch” on page 152.
10. Repeat Steps 2 through 9 for the remaining power supplies.
Related Topics Powering On an EX8200 Switch on page 180•
179Copyright©2010,Juniper Networks,Inc.
Chapter10:Connectingthe Switch