Juniper Networks EX8208 Switch User Manual


 
Figure 18: Status LEDs on a 40-port SFP+ Line Card
Ejector leverEjector lever
Line
card
LEDs
SFP+/SFP ports
Captive screw
g020902
Figure 19: Status LEDs on a 48-port SFP Line Card
g020542
Ejector leverEjector lever Line card
LEDs
SFP ports
Captive
screw
Figure 20: Status LEDs on a 48-port RJ-45 Line Card
Table14 on page 36 describes the statusLEDs on line cards for the EX8200 switch,their
colors and state, and the status they indicate.
Table 14: Status LEDs on Line Cards for EX8200 Switches
Stateand DescriptionColorLED
Theline cardis enabled/online.GreenON
Theline cardis disabled/offline.Yellow
There is no powerbeing supplied tothe line card.Unlit
On steadily—Theline cardis functioning normally.
Blinking—The line cardis booting.
GreenST
On steadily—There is a line cardfailure or alarm.
Blinking—The line cardis in diagnosticmode.
Yellow
Theline cardis disabled/offline.Unlit
Copyright ©2010,Juniper Networks,Inc.36
CompleteHardwareGuide forEX8208 EthernetSwitches