Filter
Top Products
CHAPTER 10
Connecting the Switch
•
Connecting Earth Ground to an EX Series Switch on page 167
•
Connecting AC Power to an EX8200 Switch on page 173
•
Connecting DC Power to an EX8200 Switch on page 175
•
Powering On an EX8200 Switch on page 180
•
Connecting an EX Series Switch to a Management Console on page 181
•
Connecting an EX Series Switch to a Modem on page 183
•
ConnectinganEXSeriesSwitchtoaNetworkforOut-of-BandManagementonpage187
Connecting Earth Ground to an EX Series Switch
To meet safety and electromagnetic interference (EMI) requirements and to ensure
proper operation, you must connect the switches to earth ground before you connect
them to power.
For installations that require a separate grounding conductor to the chassis, use the
protective earthing terminal on the EX Series switch chassis to connect to the earth
ground (see Figure 64 on page 167).
Figure 64: Connecting a Grounding Cable to an EX Series Switch
Before you connect earth ground to the protective earthing terminal of an EX Series
switch, ensure that a licensed electrician has attached an appropriate grounding lug to
the grounding cable.
167Copyright© 2010,Juniper Networks,Inc.