Filter
Top Products
Holding a Line Card
You must hold a line card horizontally when installing it in the chassis. Youmay hold a
line card vertically or horizontally when carrying it.
CAUTION: The line cards in EX8200 switches weigh more than 10 lb (4.5 kg). Be
prepared to support the full weight as you slide the line card into the chassis.
To hold a line card vertically:
1. Orient the line card so thatthe faceplatefaces you.To verify the orientation, confirm
that the text on the line card is right-side up.
2. Placeone handaroundthelinecardfaceplateabouta quarterofthewaydownfrom
the top edge. Do not press hard on it.
3. Place the other hand at the bottom edge of the line card.
If the line cardis horizontal before you grasp it, placeyour left hand around the faceplate
and your right hand along the bottom edge.
To hold a line card horizontally:
1. Orient the line card so that the faceplate faces you.
2. Grasp the top edge with your left hand and the bottom edge with your right hand.
You can rest the faceplate of the line card against your body as you carry it.
CAUTION: Take carenot tohit the line card against any object as youcarry it. Line card
components are fragile.
Never hold or grasp the line card anywhereexcept the places mentioned in these
procedures. In particular, never grasp the connector edge (see Figure93 on page 229).
Copyright ©2010,Juniper Networks,Inc.228
CompleteHardwareGuide forEX8208 EthernetSwitches