Filter
Top Products
Table 10: SRE Module LEDs of an EX8208 Switch (continued)
Stateand DescriptionColorLED Label (Description)
•
On steadily—SRE moduleis the master.
•
Blinking—SREmoduleis in standbymode.
GreenMS (Master)
SRE moduleis powered off.Unlit
•
On steadily—Switch fabricin the SRE moduleis operating
normally.
•
Blinking—Switchfabricin the SRE moduleis in standby mode.
GreenSF (SwitchFabric)
Switchfabric in the SRE modulehasfailed.Yellow
SRE moduleis powered off.Unlit
Related Topics Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch on page 24•
• Installing an SRE Module in an EX8208 Switch on page 155
• Removing an SRE Module from an EX8208 Switch on page 215
• Takingthe SRE Module Offline in an EX8208 Switch on page 213
Management Port LEDs in EX8200 Switches
Themanagement port on EX8200 switches has two LEDs that indicate link/activityand
port status (see Figure 9 on page 27). The management port is set to full-duplex and
the speed is set to 100 Mbps.
Figure 9: LEDs on the Management Port on an EX8200 Switch
Table 11 on page 28 describes the Link/Activity LED.
27Copyright©2010,Juniper Networks,Inc.
Chapter2:ComponentDescriptions