Filter
Top Products
Figure 2: EX8208 Switch
You can mount an EX8200 switch on a standard 19-in. four-post rack or a standard
800-mm enclosed cabinet. Up to three EX8208 switches can be installed in a standard
(42 rack unit (U)) rack provided the rack can handle their combined weight.
Lifthandlesareprovidedoneithersideoftheswitchtofacilitatethehandlingofachassis
with only the backplane installed.
WARNING: Do not use the lift handlesto lift the chassis unless the chassis is empty
(that is, contains only the backplane). Failure to heed this warning can result in injury.
See “Mounting an EX8208 Switchon a Rack or Cabinet Using a Mechanical Lift” on
page 141 or “Mounting an EX8208 Switch on a Rackor Cabinet Without Using a
Mechanical Lift” on page 143 for instructions for moving a loaded chassis.
Related Topics Rack Requirements for an EX8208 Switch on page 97•
• Cabinet Requirements and Specifications for an EX8208 Switch on page 100
• Mounting an EX8208 Switch on a Rack or Cabinet on page 138
Copyright ©2010,Juniper Networks,Inc.10
CompleteHardwareGuide forEX8208 EthernetSwitches