Filter
Top Products
Figure 85: Removing an SRE Module from an EX8208 Switch
Related Topics Installing an SRE Module in an EX8208 Switch on page 155•
• Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch on page 24
Taking the SF Module Offline in an EX8208 Switch
The SF module provides switching functionality for an EX8208 switch. Your switch can
have either zero SF modules or one SF module.
NOTE: IfyoutaketheSFmoduleofflineinaswitchconfigurationhavingonlyoneSwitch
Fabric and Routing Engine (SRE) module, throughput will be low.
To take the SF module offline:
1. Take the SF module offline:
user@switch> request chassis cb offline slot 2
For an SF module, the control board slot number is always 2.
2. (Optional) Confirm that the SF module is offline:
user@switch> show chassis environment cb slot-number
Thestate fieldin the command output showsthat the SF module is offline. It is now
safe to remove or replace the SF module.
Related Topics Installing an SF Module in an EX8208 Switch on page 157•
Copyright ©2010,Juniper Networks,Inc.216
CompleteHardwareGuide forEX8208 EthernetSwitches