Juniper Networks EX8208 Switch User Manual


 
safety requirements.Industry Canadadoes not guarantee the equipment will operate to
the users’ satisfaction.
Beforeinstallingthis equipment,usersshouldensurethatit ispermissibletoconnectthe
equipment to the facilities of the local telecommunications company.The equipment
must also be installed using an acceptable method of connection. In some cases, the
inside wiring associated with a single line individual service may be extended by means
of a certified connector assembly.The customer should be aware that compliance with
the above conditions may not prevent degradation of service in some situations.
Repairsto certifiedequipmentshouldbe made byan authorizedCanadian maintenance
facility designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
CAUTION: Users shouldnot attempt to make electrical ground connections by
themselves, but should contact the appropriate inspection authority or an electrician,
as appropriate.
Users should ensure for their own protection that the electrical ground connections of
the power utility,telephone lines, and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly important in rural areas.
European Community
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Japan
The preceding translates as follows:
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
VCCI-A
United States
The EX Series switch has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructionmanual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
309Copyright©2010,Juniper Networks, Inc.
Chapter21:ComplianceInformation