Filter
Top Products
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory
3-50Release 5/6si to Release 8r
3
Install Front Ground Plates (Systems with
Earthquake Protection)
Use 1 front ground plate between 2
stacked
cabinets.
1. At the front of the cabinets, align the holes in the top of the front ground
plate with the holes at the bottom of the upper cabinet, and insert the 4
screws. Do not tighten the screws yet. See Figure 3-17
.
2. At the front of the cabinets, align the holes in the bottom of the front
ground plate with the holes at the top of the lower cabinet. Insert the 4
supplied #12-24 x 1/2-inch (1.27 cm) thread-forming screws. Do not
tighten the screws yet.
3. Repeat Steps 1 and 2 until all stacked cabinets are fastened together.
4. Tighten all screws securely.
Figure 3-17. Rear Ground Plate and Front Plate or Cabinet Clip — Side View
Figure Notes
1. Front Ground Plate or Cabinet Clip
2. Battery
3. Rear Ground Plate
3
2
1
grdpltec LJK 031096