Filter
Top Products
Adding or Removing Cabinet Hardware
6-1Single-Mode Fiber Attenuators
6
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
6
Adding or Removing Cabinet
Hardware
This chapter contains information to add or remove cabinet hardware. To install
adjunct or peripheral equipment, refer to
DEFINITY Enterprise Communications
Server Release 8 Installation for Adjuncts and Peripherals
.
To add fiber optic cables to an existing system, refer to
DEFINITY Enterprise
Communications Server Release 8 Installation and Test for Multicarrier Cabinets.
Single-Mode Fiber Attenuators
Attenuators may be required when using single-mode fiber. See the table below.
A different value attenuator may be required even though the fiber span is
between the same 2 cabinets (local and remote cabinet). Refer to
DEFINITY
Enterprise Communications Server Release 8 Installation and Test for Multicarrier
Cabinets
for detailed fiber attenuator information.
106060718 5 dB attenuator 2 for each fiber connection
106060734 10 dB attenuator 2 for each fiber connection
106061021 15 dB attenuator 2 for each fiber connection