Filter
Top Products
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-77Add IP Interface Assembly
6
10. Click
Start > Shut Down
and select
Restart the computer?
or on the TN802:
Press the recessed reset button on the faceplate (see Figure 6-26
) until
the LCD shows a flashing
MSHUT *
. When the flashing stops and the
asterisk disappears (about 2 min), reseat the circuit pack to restart the
system.
or on the SAT:
a. Type
busyout board
UUCSS
and press
Enter
.
b. Type
reset board
UUCSS
and press Enter.
c. Type release board
UUCSS
and press Enter.
Once the system is completely initialized, the LCD reads
MEDPRO *
.
!
WARNING:
When connected remotely via pcANYWHERE, only use the
pcANYWHERE Restart Host Computer button on the toolbar to
restart Windows NT.
11. Affix the new TN802B label to the circuit pack.
12. Disconnect the monitor, keyboard, and mouse.