Filter
Top Products
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-14Add the Fiber Optic Cable
6
Install the Pass-thru Kit
1. Snap the SC-SC fiber optic adapter on the pass-thru tool. See Figure 6-5.
Use the beige adapter even if single-mode fiber is being installed. The
SC-SC adapter is better suited for cable routing in the next steps.
NOTE:
If single-mode fiber is being installed, the beige adapter will be
replaced with a blue adapter, later in this section.
Figure 6-5. Fiber Optic Adapter and Pass-Thru Tool
2. Slide the tool to the rear of the cabinet. See Figure 6-6
.
Figure Notes
1. Pass-thru Tool 2. SC-SC Fiber Optic Adapter
dafocoup RPY 06249
7
1