Filter
Top Products
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-16Add the Fiber Optic Cable
6
4. Pull the tool (with adapter and cable attached) out through the front of the
cabinet. See Figure 6-7
.
Figure 6-7. Fiber Optic Cable and Adapter
5. From the rear, route the fiber optic cable through the opening vacated by
the I/O cable connector.
6. If necessary, remove the fiber adapter from the tool and plug the fiber
optic cable into the SC-SC (single-mode) or ST-SC (multimode) adapter.
See Figure 6-8
. Check the house cabling before selecting a coupling to
use.
7. From the front of the I/O connector adapter bracket (with fiber cable),
snap the coupling into the supplied I/O connector adapter bracket.
8. Snap the I/O connector adapter bracket into the I/O connector opening.
9. Attach the outside fiber plant to the I/O connector on the rear of the
cabinet.
lcda6fop RPY 021698