Filter
Top Products
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory
2-15Upgrade the software and hardware
2
Save Translations
1. Type
save translations tape
and press Enter to save translations to the
new removable media, which takes about 2 minutes.
Save Announcements (if necessary)
1. Type
save announce
tape
and press Enter to save announcements to the
new removable media.
Restore Disk
If standard reliability:
1. Type
restore disk full
and press
Enter to write the new software to disk.
Release 8 system software is now resident on the disk.
If high or critical reliability:
2. Type
restore disk full both
and press
Enter to write the new software to
disk.
NOTE:
This command may take up to 25 minutes to complete. Until this
command finishes, the system provides no user feedback on the
system access screen. Do not press
Enter while the command
executes. Doing so clears the terminal screen as the command
finishes, erasing any success or failure messages the system may
provide.
Upgrade Software
This command copies the software from the removable media to the system disk
and takes about 15 minutes to complete.
For standard reliability:
!
CAUTION:
All calls are dropped—this is a service interruption.
1. Type
upgrade software G3V8r.xx.x.xxx.x
(entire alphanumeric string of
new software version) and press
Enter. At the prompt, press Enter to save
translations.