Filter
Top Products
CHAPTER 8 STANDBY FUNCTION
225
User’s Manual U10676EJ3V0UM
(2) Application example of HALT mode (when using the
µ
PD754244 at fX = 6.0 MHz)
<To perform intermittent operation under the following conditions>
• The standby mode is set at the falling edge of INT0 and released at the rising edge.
• In the standby mode, an intermittent operation is performed at intervals of 175 ms (INTBT).
• INT0 and INTBT are assigned a lower priority.
• The slowest CPU clock is selected in the standby mode.
<Timing chart>
P61/INT0
0 V
V
DD
V
DD
pin voltage
INT0 INT0
Operation
mode
CPU operation
Intermittent operation
(HALT mode + Iow-speed operation)
Operation mode
(low-speed)
175 ms
Operation mode
(high-speed)