Filter
Top Products
Management Commands 4 - 27
REMOTE_LOGIN
Use the REMOTE_LOGIN command to log into any remote Bridge Module
or other manageable 3Com device on the network and manage it from the
local terminal.
Note that while executing the REMOTE_LOGIN command, bridging
performance will be affected for the duration of the command.
Format
REMOTE_LOGIN {device name} {variable} {port}
Parameters
{device name} = ip_address {Internet Protocol address}
mac_address {Ethernet address}
name {remote device name}
{port} = port1
port2
Example
Log into the device with the IP address 1.2.3.4, which is on the port 1 side
of the local Bridge Module:
OEBM> remote_login ip_address 1.2.3.4 port1 [ENTER]
Example
Log into the device with the MAC address 09-00-8F-00-00-10, which is on
the port 2 side of the local Bridge Module:
OEBM> remote_login mac_address 09-00-8F-00-00-10 port2 [ENTER]
Example
Log into the device with the name G421, which is on the port 1 side of the
local Bridge Module:
OEBM> remote_login name G421 port1 [ENTER]