Filter
Top Products
4 - 52 ONline Ethernet Bridge Module Installation and Operation Guide
SET DEVICE NAME
Use the SET DEVICE NAME command to assign the Bridge Module a name
that can be used to identify it in addition to its IP address.
Format
SET DEVICE NAME {device name}
Parameter
{device name} = name up to 31 characters
Example
OEBM> set device name OEBM3 [ENTER]
Device name changed
Description
The SET DEVICE NAME command enables you to assign the Bridge Module
a name that can be used to identify it in addition to its IP address. The
name you enter is free-format up to 31 alphanumeric characters.
You can then use this name when remotely accessing the Bridge Module
using the REMOTE_LOGIN NAME {name} command instead of using the IP
or Ethernet address.
It is recommended that you make the device name and the terminal
prompt for the Bridge Module the same (refer to the SET TERMINAL
PROMPT command) so that during remote login sessions, you will know
whether you are in a local or remote session.