Filter
Top Products
Management Commands 4 - 39
SET BRIDGE CHANNEL
Use the SET BRIDGE CHANNEL command to select the two channels you
want to bridge.
Note that this command must be used with caution. If used improperly, it
has the potential to disrupt the network.
Format
SET BRIDGE CHANNEL {port} {channel}
Parameters
{port} = port1 {1, 2, front, isolated} (default is front)
port2 {1, 2, 3, isolated} (default is 1)
Example
OEBM> set bridge channel port1 isolated [ENTER]
Port 1 channel parameter changed
Description
The SET BRIDGE CHANNEL command allows you to set the bridge channels
to the two channels you want to bridge.