Filter
Top Products
4 - 24 ONline Ethernet Bridge Module Installation and Operation Guide
MONITOR
Use the MONITOR command to periodically display statistical information.
The statistics are reported periodically based upon the time that you
request.
The MONITOR command parameter displays are the same as the SHOW
command parameter displays, except that the MONITOR displays are
updated based upon the time you request. Refer to the SHOW command
section for explanations of the displays.
Note that while executing the MONITOR command, bridging performance
will be affected for the duration of the command. It is recommended that
you execute the MONITOR command for the default time period of five
minutes or longer to minimize this impact.
Format
MONITOR {interval} {group}
Parameters
{interval} = 0:05 - 30:00 (default is 5:00)
{group} = bridge (default)
ports
protocols
spantree
Example
This example displays Spanning Tree statistics every thirty seconds.
OEBM> monitor 0:30 spantree [ENTER]
145 Seconds Since Clear Port 1 Port 2
Spanning Tree State FORWARDING FORWARDING
Spanning Tree Frames Received 0 0
Spanning Tree Frames Transmitted 0 0
Port Independent Statistics
Topology Change Count 2
Seconds Since Topology Changed 114