Filter
Top Products
4 - 80 ONline Ethernet Bridge Module Installation and Operation Guide
SET TERMINAL PARITY
Use the SET TERMINAL PARITY command to set the parity to match the
parity setting used by your terminal.
Format
SET TERMINAL PARITY {parity}
Parameters
{parity} = even
none (default)
odd
Example
This example changes the terminal parity to even.
OEBM> set terminal parity even [ENTER]
Terminal parameter changed
Description
The SET TERMINAL PARITY command enables you to set the parity to
match the parity setting used by your terminal.
Note that your Bridge Module terminal port and your terminal or modem
must have the same parity setting, or you will not be able to log in.
The procedure to change the baud rate can also be used to modify terminal
parity.