Filter
Top Products
4 - 40 ONline Ethernet Bridge Module Installation and Operation Guide
SET BRIDGE DIP_CONFIGURATION
Use the SET BRIDGE DIP_CONFIGURATION command to determine
whether the channels to which the Bridge Module is configured are read
from the dip switch settings or from memory when the Bridge Module is
reset or rebooted.
Note that this command must be used with caution. If used improperly, it
has the potential to disrupt the network.
Format
SET BRIDGE DIP_CONFIGURATION {setting}
Parameters
{setting} = disable
enable (default)
Example
OEBM> set bridge dip_configuration disable [ENTER]
Dip_configuration disabled
Description
The SET BRIDGE DIP_CONFIGURATION command determines whether the
channels to which the Bridge Module is configured are read from the dip
switch settings or from memory when the Bridge Module is reset or
rebooted.