Filter
Top Products
6 - 6 ONline Ethernet Bridge Module Installation and Operation Guide
Figure 6-2. ProComm Installation Screen
Note: If the message “ProComm directory already exists,
overwrite files?” displays, you have the choice of
overwriting the files or quitting the installation. If you enter
Y to overwrite the files, the existing ProComm files are
deleted and then the new files are copied to the selected
drive.
10. Once ProComm is installed on the hard drive, you will be prompted to
swap in the 3Com FDK diskette as shown in Figure 6-3. Make sure
you place the correct diskette in the disk drive before pressing
[ENTER].
3Com CORPORATION
Firmware Distribution Kit Copyright 199X 3Com Corporation
This Firmware Distribution Kit will install and configure
ProComm, a terminal emulation program, on you computer’s hard
disk or on a second floppy drive. The program will reside in the
directory called PROCOMM. Make sure you have the PROCOMM
Distribution Diskette and the 3Com Firmware Distribution Diskette
ready at all times during the installation.
*******************************************************************
*******************************************************************
******************
Insert the ProComm Distribution Diskette in Drive A
Press any key to continue...
******************