Filter
Top Products
Management Commands 4 - 63
SET SPANTREE
Use the SET SPANTREE command to change the Spanning Tree
configuration parameters of the local Bridge Module.
Format
SET SPANTREE {parameter}
Parameters
{parameter} = bridge_priority listen_time
forward_delay_time mode
hello_address path_cost_port1
hello_time path_cost_port2
Description
The SET SPANTREE command enables you to change the Spanning Tree
configuration parameters of the local Bridge Module. These configuration
parameters will become active if this Bridge Module becomes the Root
bridge for the network.
Note that the values assigned to forward_delay_time, hello_time, and
listen_time using the SET SPANTREE command are active and in effect only
when the local Bridge Module is the root of the Spanning Tree. Otherwise,
when the local bridge is a non-root bridge the Root Bridge imposes its
values for forward_delay_time, hello_address, hello_time, and listen_time
throughout the network (including the local bridge) for as long as that
bridge continues to be the Root Bridge.
The SET SPANTREE command parameters have parameters of their own.
The following pages describe these parameters in detail.